CCXNY - CUPRIC CHLORIDE, DIHYDRATE

  • MSDS: CCXNY
  • Manufacturer: J T BAKER INC
  • Product Name: CUPRIC CHLORIDE, DIHYDRATE
  • National Stock Number: 6810-00-300-6194
Product Identification

Product ID:CUPRIC CHLORIDE, DIHYDRATE
MSDS Date:01/04/1994
FSC:6810
NIIN:00-300-6194
MSDS Number: CCXNY

Responsible Party
J T BAKER INC
222 RED SCHOOL LANE
PHILLIPSBURG, NJ 08865
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 908-859-2151

Cage: DO803

Contractor
MALLINCKRODT BAKER, INC.
PHILLIPSBURG, NJ 08865 US

Telephone: 800-582-2537

Cage: 70829

Ingredients

COPPER (2+) CHLORIDE DIHYDRATE; (CUPRIC CHLORIDE,

CAS: 10125-13-0

RTECS: GL7030000

Fraction By Weight: 90-100%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: IRRITATION OF NOSE
AND THROAT, HEADACHE, COUGHING, DIZZINESS, DIFFICULT BREATHING.
SKIN AND EYE CONTACT AND SKIN ABSORPTION: NONE IDENTIFIED.
INGESTION: NAUSEA, VOMITING. CHRONIC: N ONE IDENTIFIED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.

First Aid

First Aid:INGEST: CALL A PHYSICIAN. IF SWALLOWED, IF CONSCIOUS,
IMMEDIATELY INDUCE VOMITING. INHALATION: IF INHALED, REMOVE TO
FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. IF
BREATHING IS DIFFICULT , GIVE OXYGEN. SKIN: IN CASE OF CONTACT,
FLUSH SKIN WITH WATER. EYE: IN CASE OF CONTACT, IMMEDIATELY FLUSH
WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.

Fire Fighting

Flash Point Method:CC
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC GASES PRODUCED: HYDROGEN CHLORIDE.

Accidental Release

Spill Release Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE CLOTHING. WITH CLEAN SHOVEL, CAREFULLY PLACE
MATERIAL INTO CLEAN, DRY CONTAINER AND COVER; REMOVE FROM AREA.
FLUSH SPILL AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.
SUITABLE FOR ANY GENERAL CHEMICAL STORAGE AREA.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:RESPIRATORY PROTECTION REQUIRED IF AIRBORNE
CONCENTRATION EXCEEDS TLV. AT CONCENTRATIONS UP TO 9 PPM. A
HIGH-EFFICIENCY PARTICULATE RESPIRATOR IS RECOMMENDED, ABOVE THIS
LEVEL, A SELF-CONTAINED BREATH ING APPARATUS IS ADVISED.
Ventilation:USE GENERAL OR LOCAL EXHAUST VENTILATION TO MEET TLV
REQUIREMENTS.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . UNIFORM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:212F,100C
Spec Gravity:2.51 (H*2O=1)
Solubility in Water:COMPLETE (100%)
Appearance and Odor:BLUE-GREEN CRYSTALS OR POWDER.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
POTASSIUM, SODIUM, WATER.
Stability Condition to Avoid:MOISTURE.
Hazardous Decomposition Products:HYDROGEN CHLORIDE.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE, AND LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.